Halogen Headlights Pair for Nissan Maxima (2009-2014)

Give a 2009-2014 Maxima a clean factory look again. This original-style halogen pair replaces tired or damaged headlights on halogen-equipped cars with clear-lens assemblies that use the factory H11 bulb and the factory connector. Each lamp is DOT and SAE compliant. This is a direct-fit pair — no splicing.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing / style: original-style halogen housing, clear lens
• Lighting: halogen, with H11 bulbs included
• DOT and SAE compliant
• New aftermarket assemblies, designed to replace the factory halogen units

Bulb size: H11 (included).

In the Box

• Driver-side headlight assembly
• Passenger-side headlight assembly
• H11 halogen bulbs

Interchange References

Replaces the original halogen housings used under 26060-9N00A (driver) and 26010-9N00A (passenger), and Partslink NI2502177 / NI2503177. This is not the factory HID housing (NI2502186 / 26060-9N01A).

Installation: Nissan Maxima (2009-2014)

On the 2009-2014 Maxima, the front bumper cover comes off so you can reach the headlight bolts. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

1. Open the hood and remove the upper plastic shield clips. Remove the 10 mm bumper-bracket bolts at the fender lines, the under-bumper screws and clips, and the 10 mm fender-flare screws. Pull the bumper cover out of its guide pins and disconnect the fog-light harnesses if equipped.
2. Remove the three 10 mm bolts on each headlight, including the hidden upper bolt behind its seal. Pull the assembly forward and unplug the factory connectors. Do not pull on the wiring.
3. Install the included H11 bulbs in the new housings. Connect the factory-style connectors, seat each assembly, and start the three 10 mm bolts. Repeat on the other side.
4. Reinstall the bumper cover and fasteners, reconnect the battery, and test low beam and high beam. Aim the lamps on a level surface before driving at night.

Frequently Asked Questions

Which vehicles do these headlights fit?
2009-2014 Nissan Maxima with factory halogen headlights. They will not fit Maxima built with factory HID / Xenon lamps, which use a different housing. Compare your current lamps with our photos before ordering.

Will they fit a Maxima with factory HID or Xenon headlights?
No. Factory HID / Xenon Maxima use a different assembly (a different Partslink and connector). This pair is the halogen housing only.

Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

Do they include bulbs?
Yes. H11 halogen bulbs are included for both assemblies.

How are they installed on a 2009-2014 Maxima?
On this generation, the front bumper cover comes off first. Remove the upper plastic shield clips, the bumper-bracket bolts at the fender lines, the under-bumper fasteners, and the fender-flare screws, then pull the cover and unplug the fog lamps if equipped. Each headlight is held by three 10 mm bolts, including one upper bolt behind its seal. Unplug the harness, install the new lamp with the included H11 bulbs, reconnect, reinstall the bumper cover, and aim the lamps before nighttime driving.