Halogen Headlights Pair for Toyota Camry (1997-1999)

Give a 1997-1999 Camry a clean factory look again. This original-style halogen pair replaces tired or hazy headlights on that generation with chrome-housing, clear-lens assemblies that use the factory H4 bulb and the factory connector. Each lamp is DOT and SAE compliant. This is a direct-fit pair — no splicing.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing / style: original-style chrome housing, clear lens
• Lighting: halogen, with H4 bulbs included
• DOT and SAE compliant
• New aftermarket assemblies, designed to replace the factory halogen units

Bulb size: H4 (included).

In the Box

• Driver-side headlight assembly
• Passenger-side headlight assembly
• H4 halogen bulbs

Interchange References

Replaces the original halogen housings used under 81150AA010 / 81150-AA010 (driver) and 81110AA010 / 81110-AA010 (passenger), and Partslink TO2502117 / TO2503117. This is not the 1995-1996 lamp (TO2502112) or the 2000-2001 lamp (TO2502130).

Installation: Toyota Camry (1997-1999)

On the 1997-1999 Camry, the front bumper cover comes off so you can reach the lower headlight bolt. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

1. Open the hood. Remove the bumper-cover bolts with a 10 mm socket and the plastic retainers that hold the cover, then pull the bumper cover forward and set it aside.
2. Release the turn-signal clip at the headlight, then remove the two 10 mm bolts on top of the housing and the 10 mm bolt at the bottom. Pull the assembly forward and unplug the factory connector. Do not pull on the wiring.
3. Install the included H4 bulbs in the new housings. Connect the factory-style connector, seat each assembly, and start the three 10 mm bolts. Repeat on the other side.
4. Reinstall the bumper cover and fasteners, reconnect the battery, and test low beam and high beam. Aim the lamps on a level surface before driving at night.

Frequently Asked Questions

Which vehicles do these headlights fit?
1997-1999 Toyota Camry only. They will not fit 1995-1996 Camry or 2000-2001 Camry, which use different housings. Compare your current lamps with our photos before ordering.

Will they fit a 1995-1996 or 2000-2001 Camry?
No. 1995-1996 and 2000-2001 Camry headlights are different assemblies. This pair is the 1997-1999 lamp only.

Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

Do they include bulbs?
Yes. H4 halogen bulbs are included for both assemblies.

How are they installed on a 1997-1999 Camry?
On this generation, the front bumper cover comes off first so you can reach the lower headlight bolt. After the bumper is off, remove the turn-signal clip, the two 10 mm bolts on top of the housing, and the 10 mm bolt at the bottom. Unplug the harness, install the new lamp with the included H4 bulbs, reconnect, reinstall the bumper cover, and aim the lamps before nighttime driving.