GENSSI hero — JDM black projector headlights pair Subaru Impreza WRX Bugeye (2002-2003) white background

JDM Black Projector Headlights Pair for Subaru Impreza WRX Bugeye (2002-2003)

$573.95
Passer aux informations sur le produit
GENSSI hero — JDM black projector headlights pair Subaru Impreza WRX Bugeye (2002-2003) white background

JDM Black Projector Headlights Pair for Subaru Impreza WRX Bugeye (2002-2003)

$573.95
DS-IMPREZA-WRX-BUGEYE-HEAD-JDM-BLK-PROJ-2002-2003

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Yellowed Bugeye glass softens the whole WRX face—JDM black projectors restore a sharp crystal projector signature for night runs. GENSSI's vehicle-specific 2002-2003 Impreza WRX pair bolts in after grille removal and plugs into the factory harness with the included adapters.

Important Fitment Note: Fits 2002-2003 Subaru Impreza WRX Bugeye only—not 2004-2005 Blobeye or later GD facelifts.

Fitment

YEAR MAKE / MODEL FITS
2002-2003 Subaru / Impreza WRX Bugeye Yes

Specs

  • Style: JDM black projector, clear lens
  • Bulbs: H1 low, 9005 high, PY21W signal, T10 parking — bulbs not included; 9007 wire adapters included
  • Sold as: Headlight pair with 9007 adapters
  • Fit: Direct replacement, plugs into factory connectors

Interchange

84001-FE030, 84001-FE020, SU2502113, SU2503113

What's included

  • 1x Driver headlight
  • 1x Passenger headlight
  • 9007 wire adapters (pair)

Installation — Subaru Impreza WRX Bugeye (2002-2003)

  1. Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
  2. Remove the center grille by releasing the four top clips and two bottom clips with a flat screwdriver, then pull the grille forward.
  3. Remove each side grille piece by releasing its three plastic snap fasteners, then slide the piece forward.
  4. On the passenger side, unbolt the intake ram scoop (two screws) and lift it out for clearance.
  5. Disconnect the headlight and turn-signal connectors. Remove the three 10 mm headlight bolts per side (two visible from above, one behind the grille opening).
  6. Wiggle each assembly side-to-side to free the hidden locating tab, then pull it forward. Do not force the tab—broken tabs are a common Bugeye pitfall.
  7. Install the new housings with the included 9007 adapters, seat bulbs without touching halogen glass, reconnect harnesses, and snug the three bolts.
  8. Refit the side grilles, center grille, and intake scoop. Reconnect the battery, test low / high / signal / parking, then aim the beams.

Buyer FAQ

Will these fit a 2004-2005 WRX? No. This pair is for the 2002-2003 Bugeye front only.

Are bulbs included? No. Housings take H1 / 9005 / PY21W / T10. 9007 wire adapters are included.

Do I splice wiring? No. After grille removal, the assemblies bolt in and plug into the factory harness with the included adapters.

Vous aimerez peut-être aussi