JDM Black Smoke LED Tail Lights for Mitsubishi Lancer Evo 8/9 (2003-2006)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Stock CT9A reds look soft next to a black/smoke LED rear—this pair puts a stealth JDM night signature on Evo 8/9. GENSSI's 2003-2006 Mitsubishi Lancer Evolution 8/9 kit is a vehicle-specific black/smoke LED tail pair that bolts in and plugs into the factory harness.
Important Fitment Note: Fits 2003-2006 Mitsubishi Lancer Evolution 8/9 (CT9A). Black/smoke LED assemblies—not Evo X / 2008+ Lancer tails.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2003-2006 | Mitsubishi / Lancer Evolution 8/9 | Yes |
Specs
- Style: Black housing, all-smoke lens with LED / Incandescent functions
- Bulbs: LED / Incandescent hybrid — built-in LED sections with remaining socketed bulbs as equipped
- Sold as: JDM black/smoke LED tail light pair
- Fit: Direct-fit black/smoke LED tails for 2003-2006 Lancer Evolution 8/9
Interchange
MN161945, MN154005, MI2800119, MN161946, MN154006, MI2801119
What's included
- 1x Driver black/smoke LED tail light
- 1x Passenger black/smoke LED tail light
Installation — Mitsubishi Lancer Evolution 8/9 (2003-2006)
- Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
- Open the trunk. Pull back the rear side trim to reach the tail light mounting nuts and harness connectors on each quarter panel.
- Disconnect each harness. Remove the mounting nuts and slide the factory left and right assemblies straight back out of the body openings.
- Seat each new black/smoke LED assembly, reconnect the plugs, and snug the fasteners while checking quarter-panel and deck gaps.
- Refit the trunk trim, reconnect the battery, and test tail, brake, turn, and reverse on both sides.
Buyer FAQ
Will these fit an Evo X? No. Fitment is 2003-2006 Lancer Evolution 8/9 only—not Evo X or later Lancer tails.
Is the smoke a film? No. These are all-smoke lens assemblies with black housings—not stick-on tint covers.
Do I splice wiring? No. After trunk access, the assemblies bolt in and plug into the factory harness.