GENSSI hero — JDM red and clear tail lights 4pc Honda Accord Sedan (1992-1993) white background

JDM Red / Clear Tail Lights 4pc for Honda Accord Sedan (1992-1993)

$293.95
Passer aux informations sur le produit
GENSSI hero — JDM red and clear tail lights 4pc Honda Accord Sedan (1992-1993) white background

JDM Red / Clear Tail Lights 4pc for Honda Accord Sedan (1992-1993)

$293.95
DS-ACCORD-SEDAN-TAIL-JDM-RED-CLR-4PC-1992-1993

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Faded red-and-amber tails date a 1992-1993 Accord sedan—this JDM red / clear set gives it clean clear sections under deep red brake lenses for the sharper Japan-market look. GENSSI's kit is a vehicle-specific 4pc set of outer and inner lamps that drops in for the factory assemblies and reuses your existing sockets and bulbs.

Important Fitment Note: Fits the 1992-1993 Honda Accord 4-door sedan. It does not fit the wagon, and the 2-door coupe is not a direct fit.

Fitment

YEAR MAKE / MODEL FITS
1992-1993 Honda / Accord 4-Door Sedan Yes
1992-1993 Honda / Accord Wagon No

Specs

  • Style: Chrome housing with JDM red / clear lens in place of the stock red / amber lens; polycarbonate lens with UV and impact protection
  • Bulbs: Incandescent. Bulbs not included — reuse factory sockets and bulbs (2057 parking / brake inner and outer, 1156 signal, 1156 reverse)
  • Sold as: 4pc set: left and right outer lamps + left and right inner trunk-lid lamps
  • Fit: Direct replacement for 1992-1993 Honda Accord 4-door sedan; reuses factory sockets and bulbs

Interchange

33551-SM4-A03, 34156-SM4-A03, 33501-SM4-A03, 34151-SM4-A03, HO2818104, HO2818117, HO2819104, HO2819117

What's included

  • 1x Driver outer red / clear tail light
  • 1x Passenger outer red / clear tail light
  • 1x Driver inner (trunk-lid) red / clear tail light
  • 1x Passenger inner (trunk-lid) red / clear tail light

Installation — Honda Accord Sedan (1992-1993)

  1. Open the trunk. Use a flat screwdriver to remove the plastic liner screws at each rear corner, directly behind the quarter lamps, and fold the liner forward. Pull the lower trim cover off if it covers the studs.
  2. On one quarter lamp, twist each bulb socket counterclockwise and pull it out. Remove the three 8 mm nuts behind that lamp, then slide the housing straight out of the quarter panel. Do the other quarter the same way.
  3. On the trunk lid, twist those sockets out the same way. Remove the three 8 mm nuts at each end of the lid and pull each trunk-lid lamp out. This 4-piece kit is both the quarter lamps and the trunk-lid lamps.
  4. Move the factory sockets into the matching holes on the new housings. The harness stays plugged into those sockets. Nothing gets spliced.
  5. Set each housing on its studs. Start the 8 mm nuts by hand so the plastic studs do not cross-thread, then snug them. Do not overtighten. Fold the liner back and reinstall the plastic screws.
  6. Check tail, brake, turn, and reverse on both sides before you close the trunk. The 1992-1993 trunk-lid lamps are a different shape from the 1990-1991 lamps, so this set only goes on the 1992-1993 sedan trunk lid.

Buyer FAQ

Is this a cheap overlay or a full tail light? A full replacement set: left and right outer lamps plus left and right inner trunk-lid lamps with a red / clear lens and polycarbonate construction. It replaces the stock red / amber lenses outright instead of covering them.

Do I need to wire anything? No splicing. These are direct replacements for the factory lamps and use your existing sockets and bulbs. Bulbs are not in the box, so move your factory 2057 and 1156 bulbs over.

Which Accords does it fit, and what is in the box? The 1992-1993 Honda Accord 4-door sedan. The box holds four lamps (outer and inner, left and right) matching OEM 33551-SM4-A03 / 34156-SM4-A03 on the left and 33501-SM4-A03 / 34151-SM4-A03 on the right.

Vous aimerez peut-être aussi