GENSSI hero — light smoke lens black chrome tail lights pair Nissan Xterra (2005-2015) white background

Light Smoke Lens Black Chrome Tail Lights Pair for Nissan Xterra (2005-2015)

$209.95
Passer aux informations sur le produit
GENSSI hero — light smoke lens black chrome tail lights pair Nissan Xterra (2005-2015) white background

Light Smoke Lens Black Chrome Tail Lights Pair for Nissan Xterra (2005-2015)

$209.95
DS-XTERRA-TAIL-LT-SMOKE-BLK-CHROME-2005-2015

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

The stock red-and-clear tails on a second-generation Xterra date the back of the truck—this light smoke lens in a black chrome housing gives it a blacked-out, stealth look by day, and it still lights red on the brake with red bulbs installed. GENSSI's Xterra set is a vehicle-specific left and right assembly pair that replaces the factory lamps directly and reuses your existing sockets.

Important Fitment Note: Fits the 2005-2015 Nissan Xterra only. The 1999-2004 Xterra uses a different tail light and is not compatible.

Fitment

YEAR MAKE / MODEL FITS
2005-2015 Nissan / Xterra Yes
1999-2004 Nissan / Xterra No

Specs

  • Style: Black chrome housing with a light smoke lens; polycarbonate lens with UV protection and high impact resistance
  • Bulbs: Incandescent. Bulbs and sockets are not included — reuse the factory sockets with red 3157 (parking / brake), red 3156 (turn signal), and clear 921 (reverse) bulbs. Red bulbs are needed behind the smoke lens for red brake and signal color
  • Sold as: Pair — left and right tail light assemblies
  • Fit: Direct replacement for the 2005-2015 Nissan Xterra; plug and play, no re-wiring

Interchange

26555-EA025, 26550-EA025

What's included

  • 1x Driver (left) light smoke tail light assembly
  • 1x Passenger (right) light smoke tail light assembly

Installation — Nissan Xterra (2005-2015)

  1. Open the liftgate. Use a trim tool to lift the cargo panels over the lamp until the inner access panel is free. Remove any Phillips screws in that panel.
  2. Remove the three Phillips screws on the inner panel and unclip it. Move the smaller inner cover aside and take out its Phillips screw so the connector is reachable.
  3. Press the connector tab and unplug the tail-lamp harness.
  4. Remove the two 10 mm screws. Pry the retaining clips with a trim tool and pull the lamp out. It is held by two locating pins and a rubber harness grommet — pry the grommet free with a pick and feed the harness through.
  5. Twist each socket counterclockwise and move it into the new housing. Bulbs and sockets are not in the box. Use a red 3157 for parking and brake, a red 3156 for the turn signal, and a clear 921 for reverse so the smoke lens still shows red on the brake.
  6. Feed the harness through the new lamp, seat the grommet, line up the pins, and start both 10 mm screws before tightening them. Plug the connector in until it locks, then reinstall the inner panels, Phillips screws, and cargo trim. Check brake, turn, and reverse.

Buyer FAQ

Is this a cheap smoke cover or a full tail light? A full replacement assembly, left and right, with a polycarbonate light smoke lens in a black chrome housing. It replaces the factory red-and-clear tail light outright instead of sitting over it, and the lens has UV protection and high impact resistance.

Do I need to wire or splice anything? No re-wiring. The assemblies are plug and play and use your factory sockets. Bulbs and sockets are not in the box, so move your factory sockets over and use red 3157 and 3156 bulbs with a clear 921 reverse bulb.

Which Xterras fit, and what is in the box? The 2005-2015 Nissan Xterra. You get one driver-side and one passenger-side light smoke assembly, matching OEM 26555-EA025 on the left and 26550-EA025 on the right.

Vous aimerez peut-être aussi