Red and Clear Halogen Tail Lights Pair for Ford Transit 150 / 250 / 350 / 350 HD (2015-2024)

Refresh a 2015-2024 Transit van with this halogen tail light pair. You get driver and passenger assemblies with a red and clear lens in a chrome housing. Tail, brake, turn, and reverse functions use your existing halogen bulbs — bulbs are not included, so reuse the factory bulbs if they are still good. The housings use the factory mounting points and factory-style connectors.

Fitment

Specs

• Sold as: a driver and passenger pair
• Style: chrome housing, red and clear lens
• Lighting: halogen tail, brake, turn, and reverse; bulbs not included
• DOT certified
• 12 V
• New aftermarket assemblies

In the Box

• Driver and passenger red and clear halogen tail lights

Interchange References

Replaces original-style 2015-2024 Transit tail lights commonly crossed with CK4Z-13405-G, CK4Z-13404-G, FO2800242, FO2801242, FO2800242C, and FO2801242C.

Installation: Ford Transit 150 / 250 / 350 / 350 HD (2015-2024)

On these vans the tail lights sit at the rear corners and are reached from inside the rear cargo doors. Professional installation is recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

1. Open the rear cargo doors. At each rear corner, remove the interior trim or access cover so you can reach the nuts on the back of the tail light housing.
2. Unplug the factory connector.
3. Remove the retaining nuts and pull the housing outward from the rear corner. Do not pry on the lens.
4. Set the new housing into the opening, start the nuts by hand, then tighten them evenly. Plug the factory connector back in until it clicks.
5. Repeat on the other side, reinstall the interior trim, reconnect the battery, and check tail, brake, turn, and reverse functions before you drive.