Smoke Halogen Tail Lights Pair for Ram 1500 (2009-2018) / 2500 3500 (2010-2018)
$99.95
Passer aux informations sur le produit
Smoke Halogen Tail Lights Pair for Ram 1500 (2009-2018) / 2500 3500 (2010-2018)
$99.95
DS-55277415AF
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These tail lights fit Ram 1500 (2009-2018) and Ram 2500 and 3500 (2010-2018) with factory halogen tails only. They will not fit 2013-2018 models that came with factory LED tails, 2002-2008 Ram, or 2019-up Ram. Compare your current housings with our photos before ordering.
Give a fourth-generation Ram a smoked factory-style look with this halogen tail light pair. You get driver and passenger assemblies with a smoked lens, a red reflector bar, and a clear-tinted reverse section. Halogen bulbs are included. The housings use the factory mounting points and factory-style connectors on trucks that left the plant with halogen tails.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2009-2010 | Dodge Ram 1500 | Factory halogen tails only. Smoke lens |
| 2010 | Dodge Ram 2500 | Factory halogen tails only |
| 2010 | Dodge Ram 3500 | Factory halogen tails only |
| 2011-2018 | Ram 1500 | Factory halogen tails only. Not factory LED |
| 2011-2018 | Ram 2500 | Factory halogen tails only. Not factory LED |
| 2011-2018 | Ram 3500 | Factory halogen tails only. Not factory LED |
Specs
- Sold as: a driver and passenger pair
- Style: black housing, smoke lens
- Lighting: halogen tail, brake, turn, and reverse; bulbs included
- DOT certified
- 12 V
- New aftermarket assemblies
- OEM cross-reference: 55277415AF, 55277414AF, CH2818124, CH2819124
What’s in the box
- Driver tail light assembly
- Passenger tail light assembly
- Halogen bulbs
Installation
- Open the tailgate so you can reach the bolts behind each bedside lamp.
- Remove the two bolts that hold the assembly to the bedside.
- Pull the housing straight back off the bed, then unplug the factory connector.
- Seat the new housing on the factory mounting points, reconnect, and tighten the bolts.
- Repeat on the other side, then check tail, brake, turn, and reverse functions before closing the tailgate.
A do-it-yourself installer can usually finish both sides in about 30-45 minutes with basic hand tools. Always disconnect the negative battery cable before you start and torque fasteners to the factory specification.