Smoked RGB LED Tail Lights Set for Honda Accord Sedan (2023-2025)

Give your 2023-2025 Honda Accord sedan a rear end that looks finished, not factory-plain. Our smoked-lens, black-housing RGB LED set is a complete three-piece kit: both outer lamps plus the full-width trunk light bar, so the whole tail lights up as one. Choose your running-light color to match the build or the mood, get a few seconds of start-up animation when you fire it up, and keep everyday brake, turn, and reverse. The lamps screw into the factory mounting points and connect with the cables and adapters in the box.

Fitment

This set fits 2023-2025 Honda Accord sedan (11th generation), including gas and hybrid sedan trims: LX; EX (2023-2024); SE (2025); Hybrid EX-L; Hybrid Sport; Hybrid Sport-L; and Hybrid Touring. It does not fit 2018-2022 Accord or earlier generations.

Features

• RGB running lights you control. Pick the color you want, switch between modes, and get a few seconds of start-up animation.
• Full-width trunk light bar. Included with the outer lamps, so the color and the light run across the whole rear.
• Everyday functions, still there. LED brake, turn signal, and reverse.
• Smoked lens, black housing. Polished, modern look on an 11th-gen Accord.
• Built as a sealed LED assembly. ABS, PC, and PMMA; 12 V, 35 W, 6000K; IP68 waterproof rating; DOT / SAE / ISO certified. 1-year manufacturer warranty.

Signs It's Time to Upgrade Your Tail Lights

Worn-out lamps are one reason to swap. Wanting the rear to actually look like the rest of your Accord is another.

• Cracked, faded, or cloudy lenses. Hazed or yellowed plastic dulls the whole back of the car, even when the lights still work.
• Moisture inside the housing. Fog, water, or condensation is a sign the seal is done.
• Burned-out or dead sections. Dark patches or uneven lighting make the rear look tired and are harder for other drivers to read.
• The stock rear just looks dated. If the lamps still work but the Accord no longer looks the way you want it to, that is a reason to upgrade too — especially if you want RGB color, a start-up animation, and a full-width light bar instead of the factory tail.

Why Drivers Love This RGB Set

• Color that matches your build — or your mood. The running lights are RGB, and you choose the color from the app, including multiple modes.
• A short welcome when you start up. The running lights play a few seconds of start-up animation when the car comes to life.
• A light bar that ties the rear together. The trunk lamp is part of the set, so the glow runs full-width instead of stopping at the quarter panels.
• A smoked, modern look. Black housing and a smoked/tinted lens give the 11th-gen Accord that cleaner, after-dark presence — the kind of rear end that stands out at night and at a car meet.
• Made for show as much as a straight replacement. This set is a direct-fit upgrade for tired or worn lamps, and it is also for Accord owners who want a concept-car rear, not just another stock-looking tail.

What's included

• 1 x driver side (left) tail light
• 1 x passenger side (right) tail light
• 1 x trunk light (through-light bar)
• Connection cable
• Low-profile adapters for the outer lamps and the trunk light
• RGB sync cable
• LEDs are built in, so no extra bulbs are needed

Installation: 2023-2025 Honda Accord Sedan (11th gen sedan)

This is a three-piece set: a left and a right outer lamp on the rear quarter panels, plus a full-width lamp on the trunk lid. The lamps are a screw-in, direct-fit replacement for the stock units. Professional installation is recommended. Tools typically needed: a plastic trim tool and 8 mm / 10 mm sockets. Plan on about 45-60 minutes.

1. Open the trunk. On each side, use a trim tool to remove the small plastic access cover beside the outer (quarter-panel) lamp. Remove the two exposed mounting screws, disconnect the factory connector, and pull the lamp straight back off the body.
2. Remove the trunk-lid inner liner (plastic clips) to reach the factory trunk lamp. Disconnect the electrical connectors. If your Accord has a rearview camera in the factory trunk lamp, disconnect it and set the camera aside to transfer to the new trunk bar. Remove the nuts or screws holding the factory trunk lamp and lift the assembly out.
3. If you removed a rearview camera, install it in the new trunk bar before mounting the bar. Fit the new outer lamps and trunk bar to the original mounting points and refit the screws or nuts.
4. Connect the factory plugs and the included connection cable, low-profile adapters, and RGB sync cable as shown in the back-details photo. Route every harness so the trunk hinge cannot pinch it.
5. Before refitting all of the trim, test running lights (including RGB and the start-up animation), brake, turn, and reverse on both outer lamps and on the trunk bar.
6. Refit the trunk-lid liner and the outer access covers.

RGB color is controlled through a mobile app (LightRunning). Follow the instructions supplied with the set to connect the app. If a factory plug does not match an adapter in the box, stop and compare your connectors with the back-details photo before cutting or splicing any wire.

FAQ

What does this fit?

2023-2025 Honda Accord sedan (11th generation), including gas and hybrid sedan trims. It does not fit earlier Accord generations.

Is this sold as a set, and does it include the trunk light?

Yes. It is a complete set: left and right outer tail lights plus the trunk light bar.

Are these the same as sequential smoked LED tails?

No. This set is an RGB LED design with a color-changing trunk bar and start-up animation, not the smoked sequential LED set.

Are bulbs included?

Yes. The lamps are LED with the light sources built in, so no extra bulbs are needed.

How long does installation take?

About 45-60 minutes with basic hand tools. Professional installation is recommended.