Black HID Projector Headlights Pair with LED DRL for Lexus RX350 / RX450h (2013-2015)

Put the sparkle back in your facelifted RX. This black-housing pair replaces yellowed, hazy or cracked 2013-2015 HID headlights with crisp clear lenses, a bright projector low beam and the signature LED daytime running light. Each lamp bolts to the factory mounting points and plugs into the factory connectors, so your xenon bulbs, ballasts and control module simply move across.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing: black, clear lens, amber corner
• Low beam: HID / xenon projector; high beam: halogen reflector
• Daytime running light: LED, built in
• Bulbs: D4S low beam, HB3 (9005) high beam (not included)
• Not included: D4S bulbs, ballasts and headlight control module (reuse your originals)
• DOT and SAE compliant
• Plugs into the factory connectors (no splicing)

In the Box

• Driver-side HID projector headlight with LED DRL
• Passenger-side HID projector headlight with LED DRL

Interchange References

Replaces the original assemblies commonly crossed with 81185-48B10, 81145-48B10, 81170-0E160, 81130-0E160, LX2518157, LX2519157, LX2518144, LX2519144.

Installation: Lexus RX350 / RX450h (2013-2015)

On the 2013-2015 RX the front bumper cover comes off to reach the headlight bolts, and the HID parts move from your old lamps to the new ones. Wear gloves when handling the xenon bulbs, and always disconnect the negative battery cable first, because the HID ballast circuit carries high voltage.

1. Disconnect the negative battery cable. Remove the clips along the top of the bumper and grille, the wheel-well fasteners and the screws and clips underneath.
2. Release the bumper cover at each fender, unplug the fog lights, washer and sensor connectors if fitted, and set the cover aside.
3. Remove the headlight mounting bolts, ease the lamp forward and unplug its connectors, including the leveling motor plug.
4. On the bench, move the D4S bulbs, ballasts, HB3 high beam bulbs and headlight control module from the old lamps to the new ones, then plug the new lamps in and test all functions before the bumper goes back on.
5. Bolt the lamps in, refit the bumper cover, reconnect the battery and aim the beams. If a leveling warning appears, have a Lexus dealer or a shop with a scan tool check the leveling system.

Frequently Asked Questions

Which vehicles do these headlights fit?
2013-2015 Lexus RX350 and RX450h (Base, F Sport, Sportdesign) with factory HID / xenon projector headlights with LED DRL and automatic leveling. They do not fit halogen or LED headlights, 2010-2012, or 2016+. Compare your current lamps with our photos before ordering.

Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

Are the xenon bulbs and ballasts included?
No. D4S bulbs, ballasts, HB3 (9005) high beam bulbs and the headlight control module are not included. Move them over from your original headlights.

Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.

How are they installed on a 2013-2015 Lexus RX350 / RX450h?
The front bumper cover has to come off. Unbolt each headlight, move your D4S bulbs, ballasts, HB3 bulbs and control module to the new lamp, plug it in, test it, then refit the bumper and aim the beams.